Even the non-nautical amongst us can appreciate that one of the biggest problems with measuring the levels of fuel and water in vessels is that the sea is rarely flat. With the contents of the tanks seldom calm, obtaining a stable and accurate level reading can be difficult.
rough seas 300x201The most common marine based level gauge use floats that sit on the surface of the liquid being measured. This positioning exposes the floats to the turbulent motions experienced inside the tanks, resulting in inaccurate and unreliable measurement data.
No moving parts- accurate measurement
Capacitive liquid level gauge do not use a float and have no moving parts whatsoever. Instead they have a hollow probe which is immersed into the liquid and the actual level measurement takes place inside the probe. Using holes in the end cap of the sensor, liquid flows in and out from the bottom of the sensor where turbulence is at a minimum.
This provides a very significant suppression of surface level fluctuations as the submerged holes slow rapid changes in liquid level on the outside, which the sensor does not pick up. This all helps in providing an accurate, reliable and consistent level output from the sensor, letting you know exactly how much fuel is available in the tank whatever the sea conditions.
Solid-state capacitive technology also offers excellent long term reliability as there’s no mechanical linkages to break or wear out, outlasting other sensor types which would perish in the applications.
Continuous Output
Better still, capacitive level gauge also provide a continuous, ‘stepless’ output, as opposed to many float sensors which have a series of reed switches that require a significant level change to affect the output. This is because the fluid level has to change enough for the float to ‘de-activate’ one reed switch and ‘activate’ the next one along, thereby providing a ‘stepped’ or coarse resolution. The capacitive sensor generates a continuous output relating directly to the level of liquid inside the sensor with a very fine resolution, as it is not jumping from one switch to the next. Additionally, there is always the possibility that one reed switch could fail, resulting in a large measurement ‘dead spot’ on the sensor.
Adaptable Installation
The sensors can be used with metal and plastic tanks and for the awkward shaped tanks, they do not have to be installed vertically-indeed, they can be mounted up to an angle of 60° from vertical without modification, to help cover the full depth of an irregular tank shape. Capacitive level gauge can also be used on a variety of liquid types.
The advantages of capacitive sensing technology can also be utilised across a range of harsh environment applications to provide long-term cost effective reliability, further advantages of Gill’s Marine Liquid level gauge are highlighted in the video below.
This article comes from gillsc edit released