Posted on

Guided wave radar for servo tank gauge

Guided wave radar (GWR) is a technology commonly used in servo tank gauges for accurate level measurement in various industries, including oil and gas, chemical, and petrochemical. Servo tank gauges provide continuous and precise level measurement in storage tanks.

Here’s how guided wave radar technology is applied in servo tank gauges:

  1. Principle of Operation: Guided wave radar works based on the principle of time-domain reflectometry. It uses guided electromagnetic waves (microwave pulses) that travel along a probe or rod inserted into the tank. The waves are guided along the probe, and when they encounter a change in the dielectric constant (e.g., at the liquid level interface), a portion of the energy is reflected back to the transmitter/receiver unit.
  2. Measurement Accuracy: GWR technology offers high measurement accuracy and reliability. It is unaffected by factors such as tank geometry, temperature, pressure, or changes in the dielectric constant of the liquid being measured. It provides precise level measurements even in challenging conditions, such as tanks with foaming, agitated liquids, or heavy vapors.
  3. Continuous Level Measurement: GWR allows for continuous level measurement, providing real-time data on the level of the liquid in the tank. It can accurately measure levels from the top of the tank down to the liquid interface, including multiple interfaces in the case of layered or emulsified liquids.
  4. Interface Measurement: GWR can effectively measure the interface between two immiscible liquids, such as oil and water. It can detect and track the position of the interface, providing information on the relative quantities of different liquids present in the tank.
  5. Easy Installation and Maintenance: Guided wave radar probes are relatively easy to install in tanks. They can be inserted through a variety of mounting options, such as flanges or threaded connections. Additionally, GWR systems require minimal maintenance, as they have no moving parts and are less prone to buildup or fouling compared to other measurement technologies.
  6. Integration and Connectivity: GWR systems often come with options for integration into larger tank gauging systems or control systems. They can provide analog, digital, or bus communication outputs for seamless integration with supervisory control and data acquisition (SCADA) systems or distributed control systems (DCS).

Guided wave radar technology in servo tank gauges provides accurate and reliable level measurements, making it a preferred choice for inventory management, custody transfer, and process control applications in various industries.

Posted on

Digital Portable Gauging

Digital portable gauging refers to the use of digital measurement devices or instruments that are portable and can be easily carried and used in various applications. These gauges are designed to provide accurate and precise measurements of different parameters, depending on the specific type of gauge being used.

Here are a few examples of digital portable gauging commonly used in various industries:

  1. Digital Calipers: Digital calipers are handheld gauges used to measure the distance between two points. They consist of a sliding jaw, an LCD display, and a digital readout that provides the measurement in millimeters, inches, or other units.
  2. Digital Thickness Gauges: These gauges are used to measure the thickness of materials such as paper, plastic, metal, or fabric. They typically employ a digital display and a probe or sensor to determine the thickness accurately.
  3. Digital Micrometers: Digital micrometers are precise instruments used to measure the dimensions of small objects or components with high accuracy. They consist of a spindle, an anvil, and a digital display that shows the measurement in micrometers or other units.
  4. Digital Pressure Gauges: These gauges are used to measure the pressure of gases or liquids in various systems or equipment. They often feature a digital display that provides real-time pressure readings in units such as psi, bar, or pascals.
  5. Digital Tachometers: Tachometers are used to measure the rotational speed or RPM (revolutions per minute) of rotating objects such as motors, shafts, or engines. Digital tachometers provide quick and accurate readings through a digital display.
  6. Digital Force Gauges: Force gauges are used to measure the force or tension applied to an object. Digital force gauges employ load cells and a digital display to provide precise force measurements in units such as pounds or newtons.
  7. Digital Thermometers: These gauges are used to measure temperature in various applications. Digital thermometers often have a probe or sensor that detects temperature and a digital display that shows the readings in degrees Celsius or Fahrenheit.

Digital portable gauging offer advantages such as ease of use, quick and accurate measurements, and the ability to store and analyze data. They are widely used in industries such as manufacturing, construction, automotive, aerospace, and quality control, where precise measurements are crucial for ensuring product quality and performance.

Posted on

Tank gauging system used for bulk storage of gasoline

A tank gauging system is an essential tool used for the bulk storage of gasoline or any other liquid in tanks. It provides accurate and real-time information about the level, volume, temperature, and other parameters of the stored gasoline. Here are the components and functionalities commonly found in a tank gauging system for bulk gasoline storage:

  1. Level Sensors: Various types of level sensors are used to measure the liquid level inside the tank. These can include float-based sensors, guided wave radar, magnetostrictive sensors, or ultrasonic sensors. They provide continuous or point level measurements to determine the amount of gasoline in the tank.
  2. Temperature Sensors: Temperature sensors are used to measure the temperature of the gasoline. This information is crucial for accurate volume calculations, especially as gasoline expands or contracts with temperature changes.
  3. Tank Gauges: Tank gauges are the central units of the system. They receive data from the level and temperature sensors and provide real-time readings and calculations of the volume of gasoline in the tank. Modern tank gauges are typically electronic and equipped with a display or connected to a centralized control system.
  4. Communication and Data Management: Tank gauging systems often include communication capabilities to transmit data to a centralized control room or monitoring station. This allows operators to remotely monitor the tank levels, receive alerts, and generate reports. Common communication protocols used include Modbus, Ethernet, or wireless options.
  5. Alarms and Safety Features: Tank gauging systems incorporate alarm functionalities to alert operators of critical conditions. These can include high or low-level alarms, high-temperature alarms, or leak detection alarms. The system can also trigger shutdown procedures or activate safety measures in case of emergencies.
  6. Software and Integration: Tank gauging systems may come with dedicated software that enables operators to manage and analyze data, configure alarms, and generate reports. Integration with other systems, such as inventory management or SCADA (Supervisory Control and Data Acquisition) systems, can provide further insights and streamline operations.

The tank gauging system for bulk storage of gasoline ensures accurate inventory management, prevents overfilling or underfilling, assists in scheduling deliveries, and helps maintain operational efficiency and safety. Compliance with industry regulations and standards, such as API (American Petroleum Institute) standards, is also important to ensure the system meets the necessary requirements for gasoline storage.

Posted on

What are the difference types of tank gauging systems?

There are several different types of tank gauging systems used to measure and monitor the level, volume, and other parameters of liquids in tanks. Here are some common types of tank gauging systems:

  1. Float and Tape System: This traditional system consists of a float connected to a tape or wire. The float moves up and down with the liquid level, and the tape/wire indicates the level on a calibrated scale. This system requires manual reading and is commonly used for small or atmospheric tanks.
  2. Radar Level Gauges: Radar-based systems use electromagnetic waves to measure the distance between the gauge and the liquid surface. They provide continuous level measurement, are suitable for various tank sizes, and can be used in different liquid types. Radar level gauges can also provide additional information, such as temperature and density.
  3. Servo or Displacer Level Gauges: These systems use a servo motor or displacer to measure the liquid level. The servo motor adjusts the position based on liquid level changes, while the displacer senses the buoyancy forces. These systems provide high accuracy and are commonly used in large tanks or in applications requiring precision.
  4. Ultrasonic Level Gauges: Ultrasonic gauges utilize sound waves to measure the distance between the gauge and the liquid surface. They emit ultrasonic pulses and measure the time it takes for the pulses to return. Ultrasonic level gauges are non-contact and suitable for a wide range of tank sizes and liquid types.
  5. Capacitance Level Gauges: Capacitance-based systems measure the changes in electrical capacitance between the probe and the tank wall. As the liquid level changes, the capacitance varies, providing an indication of the level. These systems can be used in various tank sizes and are suitable for both conductive and non-conductive liquids.
  6. Differential Pressure Level Gauges: These gauges measure the pressure difference between the tank’s bottom and the liquid surface. The pressure difference is proportional to the liquid level. Differential pressure level gauges are commonly used in pressurized tanks or when dealing with hazardous or corrosive liquids.
  7. Guided Wave Radar Level Gauges: Guided wave radar systems use radar technology to measure the level of liquids. They employ a waveguide that guides the radar signal along its length, and the reflection of the signal indicates the liquid level. These systems are suitable for both liquids and solids and can handle challenging process conditions.

It’s important to note that the choice of tank gauging system depends on factors such as tank size, liquid properties, accuracy requirements, environmental conditions, and regulatory standards. Each system has its advantages and limitations, and selecting the appropriate system should be based on the specific application and operational needs.

Posted on

Glass Weld-On Level Gauges

Glass weld-on level gauges, also known as sight glasses or sight level gauges, are devices used to visually monitor the level of liquids or fluidized solids in tanks, vessels, or pipelines. They are designed to be permanently welded onto the walls of the container or pipe, providing a transparent viewing window for easy observation of the fluid level.

Here are some key features and components of glass weld-on level gauges:

  1. Glass Tube: The main component of a glass weld-on level gauge is a transparent glass tube that serves as the viewing window. It is usually made of borosilicate glass, which is resistant to thermal expansion and chemical corrosion.
  2. Protective Housing: The glass tube is typically housed within a protective metal or plastic frame or housing. This enclosure provides structural support and protects the glass tube from mechanical damage or external impacts.
  3. Welding Connection: Glass weld-on level gauges are specifically designed for installation by welding onto the container or pipe. The housing of the gauge is welded directly onto the wall, ensuring a secure and leak-proof attachment.
  4. Fluid Inlet and Outlet Connections: The gauge housing is equipped with inlet and outlet connections that allow the liquid or gas to enter and exit the glass tube. These connections are usually threaded or flanged to facilitate the integration of the gauge into the system.
  5. Graduations and Markings: To provide accurate level readings, the glass tube is often marked with graduations or markings at regular intervals. These markings help in determining the precise level of the fluid within the gauge.
  6. Gaskets and Seals: Gaskets or seals are used to ensure a tight and secure connection between the gauge housing and the container or pipe. These seals prevent any leakage or seepage of the fluid being monitored.

Glass weld-on level gauges are commonly used in various industries, including chemical processing, pharmaceuticals, oil and gas, food and beverage, and water treatment. They offer a reliable and straightforward method for visually monitoring fluid levels in a wide range of applications. However, it’s important to consider the compatibility of the glass material with the specific fluid being measured to ensure chemical resistance and durability. Regular maintenance and inspection of the gauge are also recommended to ensure proper functioning and to address any potential issues, such as glass clouding or coating.

Posted on

Portable Gauging & Sampling Solutions

Portable gauging and sampling solutions refer to equipment and tools that are designed for on-site measurement and sampling of various substances or fluids. These solutions are portable, compact, and often handheld, allowing for convenient and efficient gauging and sampling in different industries. Here are some common examples of portable gauging and sampling solutions:

  1. Portable Gauges: These are handheld devices used to measure and monitor parameters such as pressure, temperature, flow rate, or levels of liquids or gases. They provide on-the-spot readings and are commonly used in industries such as oil and gas, water treatment, HVAC, and manufacturing. Portable gauges are often equipped with digital displays for easy reading and may have additional features like data logging or wireless connectivity.
  2. Handheld Sampling Pumps: These are small, portable pumps used for sampling liquids or gases from various sources. Handheld sampling pumps are commonly used in environmental monitoring, air quality testing, water quality analysis, and industrial hygiene applications. They enable the collection of representative samples for laboratory analysis or immediate on-site testing.
  3. Portable Spectrometers: Portable spectrometers are handheld devices used for on-site analysis of materials or substances. They utilize techniques such as spectroscopy to identify and quantify chemical compositions or properties. These portable devices find applications in fields like environmental monitoring, agriculture, food safety, and pharmaceuticals.
  4. Portable Water Testing Kits: These kits include compact and portable instruments for testing water quality parameters, such as pH, conductivity, dissolved oxygen, turbidity, and various contaminants. They often come with reagents, sensors, or test strips for quick and accurate water analysis in field settings like environmental assessments, drinking water testing, or swimming pool maintenance.
  5. Portable Gas Detectors: These handheld devices are used to detect and monitor the presence of hazardous gases in the environment. Portable gas detectors are essential in industries like mining, oil and gas, chemical manufacturing, and confined space entry. They provide real-time alerts and measurements of gas concentrations to ensure safety and prevent potential hazards.
  6. Portable Liquid Samplers: These devices are used to collect representative samples of liquids from tanks, pipelines, or other containers. Portable liquid samplers are commonly used in industries such as wastewater treatment, oil refineries, food and beverage, and pharmaceuticals. They help ensure proper quality control, compliance with regulations, and laboratory analysis.

These are just a few examples of portable gauging and sampling solutions available in various industries. The specific equipment and tools required will depend on the parameters being measured, the substances involved, and the intended applications. It’s essential to select reliable and accurate portable gauging and sampling solutions appropriate for your specific needs.

Posted on

How accurate is the tank gauging system?

Tank gauging systems are used to measure the level, volume, and other parameters of liquids stored in tanks. The accuracy of a tank gauging system can vary depending on several factors, including the type of system, its components, installation, calibration, and maintenance. Here are some key points to consider:

  1. System Type: Tank gauging systems can be based on various technologies such as float and tape, servo, radar, ultrasonic, or guided wave radar. The accuracy can vary between different technologies.
  2. Calibration: Accurate calibration is crucial for achieving reliable measurements. The tank gauging system needs to be calibrated periodically against a known reference or master measurement to ensure accuracy.
  3. Installation: Proper installation is essential to minimize measurement errors. Factors such as tank shape, size, and obstructions can impact accuracy. Installation guidelines provided by the manufacturer should be followed meticulously.
  4. Maintenance: Regular maintenance, including cleaning, inspection, and adjustment of the system components, is vital to maintain accuracy. Sensor drift, electrical interference, or mechanical issues can affect measurement precision.
  5. Environmental Factors: External factors like temperature, pressure, vapor density, and composition of the stored liquid can influence measurement accuracy. It is important to consider these factors and select a system suitable for the specific application.
  6. System Quality and Manufacturer: The quality of the tank gauging system and the reputation of the manufacturer are significant factors. Reliable manufacturers with a proven track record are more likely to produce accurate and precise systems.

Modern tank gauging systems can provide accurate measurements within a reasonable margin of error. However, the specific accuracy achievable will depend on the factors mentioned above. It is essential to consult the manufacturer’s specifications and recommendations for the particular tank gauging system being used.

Posted on

The Engineer’s Guide to Servo Tank Gauge

We will delve into the workings, applications, and benefits of this vital instrument used in the field of tank level measurement and management. So, let’s get started.

  1. What is a Servo Tank Gauge? A Servo Tank Gauge is a precision instrument designed to measure and monitor the level of liquid inside storage tanks. It consists of a servo motor-driven measuring tape, an electronic position sensor, and a control unit. The motor-driven tape travels up and down, providing accurate measurements of the liquid level.
  2. How does it work? The servo motor rotates the drum that the measuring tape is wound around. As the tape moves, it unrolls, extending into the tank until it reaches the liquid’s surface. The position sensor precisely measures the length of tape unrolled and converts it into an electronic signal, indicating the liquid level. The control unit processes this information and displays the level on a local display or transmits it to a central control system.
  3. What are the advantages of using a Servo Tank Gauge?
  • Accurate Measurements: Servo Tank Gauges offer high precision, ensuring reliable and accurate measurements, even in challenging conditions such as temperature variations or sloshing liquids.
  • Versatility: These gauges can be used for various liquids, including petroleum products, chemicals, water, and more. They are adaptable to different tank sizes and configurations.
  • Remote Monitoring: Many servo tank gauges allow for remote monitoring and control, enabling real-time level data access from a central control room or even through web-based interfaces.
  • Inventory Management: With accurate and continuous level monitoring, Servo Tank Gauges play a crucial role in inventory management, facilitating efficient planning, replenishment, and preventing stockouts or overflow situations.
  • Safety: By providing reliable level data, these gauges contribute to safety measures, preventing overfilling or potentially hazardous situations associated with insufficient or excessive liquid levels.
  1. What are the applications of Servo Tank Gauges? Servo Tank Gauges find application in various industries, including:
  • Oil and Gas: for storage tanks at refineries, terminals, and distribution centers.
  • Chemical: in chemical processing plants, storage facilities, and tank farms.
  • Water and Wastewater: for water treatment plants, reservoirs, and storage tanks.
  • Food and Beverage: in breweries, dairies, and liquid storage facilities.
  • Pharmaceutical: for monitoring storage tanks in pharmaceutical manufacturing plants.
  • Many other industries requiring accurate and reliable tank level measurement.
  1. Installation and Maintenance Considerations:
  • Installation: Proper installation is crucial to ensure accurate measurements. Following manufacturer guidelines and industry best practices is essential.
  • Calibration: Regular calibration is necessary to maintain accuracy. Calibration should be performed by trained personnel using suitable equipment.
  • Maintenance: Regular inspection and maintenance help ensure optimal performance. This includes checking for tape wear, cleaning sensors, verifying motor functionality, and assessing overall system health.

In conclusion, Servo Tank Gauges are indispensable instruments for precise and reliable tank level measurement. Their accuracy, versatility, remote monitoring capabilities, and contribution to safety and inventory management make them a valuable asset across various industries. By mastering the intricacies of Servo Tank Gauges, engineers like you can enhance efficiency, productivity, and safety in liquid storage and management systems.

Thank you for joining me in this guide to Servo Tank Gauges.

Posted on

Operation of grounding and overfill protection system

Grounding and overfill protection systems are essential safety measures used in various industries, particularly in storage tanks for liquids such as petroleum, chemicals, or hazardous substances. These systems help prevent accidents, mitigate the risk of fires or explosions, and protect the environment. Here’s an overview of how grounding and overfill protection systems operate:

Grounding System:

  1. Grounding Electrode: The grounding system typically starts with a grounding electrode, which is a metal rod or plate buried in the ground. It provides a low-resistance path to the earth.
  2. Grounding Cable: A heavy-duty conductor, such as a copper cable, is connected to the grounding electrode. This cable is routed to the storage tank or a metal structure associated with the tank.
  3. Tank Bonding: The grounding cable is securely connected to the tank structure, ensuring electrical continuity between the tank and the grounding system.
  4. Static Electricity Dissipation: The purpose of the grounding system is to dissipate static electricity that can accumulate on the tank during operations such as filling or transferring liquids. By providing a path of low resistance to the earth, the grounding system prevents static charges from building up and reduces the risk of sparks or discharge that could ignite flammable substances.

Overfill Protection System:

  1. Level Sensors: Overfill protection systems employ various level sensors to monitor the liquid level inside the tank. These sensors can be float switches, ultrasonic sensors, capacitance probes, or other technologies.
  2. Control Panel: The sensors are connected to a control panel or an automation system that receives and processes the level information.
  3. Set Points and Alarms: The control panel is programmed with set points or thresholds that determine safe operating levels for the tank. If the liquid level exceeds the set point, an alarm is triggered.
  4. Alarms and Shutdowns: When an overfill condition is detected, the system activates audible and visual alarms to alert personnel. In some cases, it may also initiate automatic shutdown procedures, such as closing valves, stopping pumping operations, or activating emergency measures.

The grounding and overfill protection systems work together to minimize the risk of static discharge, prevent overfilling, and maintain safe operating conditions for storage tanks. These systems are often required by regulatory agencies and industry standards to ensure the safety and environmental integrity of storage facilities.

Posted on

What is basic portable density meter?

A basic portable density meter is a handheld device used to measure the density or specific gravity of liquids. It is a compact and easy-to-use instrument designed for quick and accurate density measurements in various industries, including chemical, pharmaceutical, food and beverage, and petroleum.

Here are some key features and functions of a basic portable density meter:

  1. Measurement principle: Most portable density meters operate based on the oscillating U-tube principle. The device contains a U-shaped tube with a vibrating element. When immersed in a liquid sample, the density of the sample affects the frequency of vibration, allowing the device to determine the density.
  2. Density measurement: Portable density meters provide direct density readings or specific gravity measurements. Density is typically displayed in units such as grams per milliliter (g/mL) or kilograms per liter (kg/L). Specific gravity represents the ratio of the density of a substance to the density of a reference substance (usually water).
  3. Temperature compensation: Many portable density meters feature automatic temperature compensation to account for the temperature variations of the sample. Density values are typically adjusted to a reference temperature, such as 20°C or 25°C, to ensure accurate measurements.
  4. Data storage and connectivity: Basic portable density meters often have internal memory to store measurement data. Some models may also offer data transfer capabilities, such as USB or Bluetooth connectivity, to transfer the measurement results to a computer or other devices for further analysis.
  5. User-friendly interface: These devices are designed to be user-friendly, with intuitive interfaces and easy-to-read displays. They often feature simple navigation buttons or touchscreens for convenient operation.
  6. Robust and portable design: Portable density meters are constructed to withstand harsh environments and are typically resistant to chemicals and splashes. They are lightweight and compact, making them easily transportable for on-site measurements.
  7. Battery-powered: Portable density meters are typically powered by batteries, allowing for mobility and field use. They may come with rechargeable batteries or replaceable batteries, depending on the model.

Portable density meters are commonly used for quality control, process monitoring, and research purposes. They enable fast and reliable density measurements, providing valuable information about the composition, concentration, purity, and consistency of liquids in various industries.